This configuration JYJ blowers will find wide range of applications and usage. Whether that your activity involves commercial or residential landscaping (mulch and wood chips) In addition to the standard range of turbines and kits—Romanet SARL, also designed number of highly customized solutions of Hydraulic Bulkheads and Doors

 

whether you replenish playgrounds (wood chips) for a municipalities or you are involved in ground erosion control on construction sites (compost/wood chips).— the JYJ design will prove to be very efficient.

 

With an OD of 15 to 28 inches for an 6 inches OD outlet, the 4 models JYJ 400, 500, 600 or 700 allows a great numbers of options - as far as a solution is concerned. Light trucks for urban environment, dedicated 27 Tons tipping semi-trailers or self powered containers for roll-off and hook arms systems, those are few of them.

 

Running in parallel, the double turbine is driven by a hydraulic motor of 1 to 2 cu.in/rev of displacement. Rotating at 4500 rpm, air velocity will vary from 90 to 230 miles per hour for a operating pressure 0.01 to 55 psi. Yielding between 0.6 and 1.9 cu.yd/min at 140 ft max.

 

The turbines design ensure an excellent suction of the product and mix with the airflow, while ensuring perfect physical integrity of the wood chips or mulch—for pre- served products quality and minimum of dust during the operation.

 

An auger guarantees optimum feeding and efficiency of the system. We recommend a 20 to 40 GPM at 2500 PSI hydraulic power unit to run this configuration. Versatile, powerful, reliable and cost efficient, the mulch bark blower will optimize your assets and increase your productivity and profits.

 

Pressure: Please note that unlike compressor driven systems, the JYJ blower work on a airflow principle—to preserve product quality. The operating pressure only results from the pressure losses in the flex hose: friction and product flowing around.

 

Hydraulic Bulkheads and Doors -

 

Throughout the years, Romanet’s team has been helping customers to find effective and reliable solutions—for their needs.

Following example describes a “moving bulk- head” on a agricultural trailer. Instead relying on

gravity or adding a complex moving floor — the trailer was fitted with moving bulkhead

(powered by hydraulic cylinders) designed to be pushed back When the equipment is not used for wooden pellets and wood chips bulk delivery—for an extended period of time—the door is replaced

by the original equipment door. The fully hydraulic equipped one is hanged and stored on

a frame . ward - in order to keep the material to be handled in contact with the rear door. The auger

combination ensure fast and interrupted feeding of the turbines.

 

The constraints of this design were to use an existing equipment (agricultural trailer in that case), to circumvent the problems associated with trailer tipping (Low height buildings, utili-

ties lines) in order to get as close to building as possible.

 

Precitechenvironment an universal pneumatic conveyor kit for bulk deliveries of wood chips, mulch bulk delivery and mulch.The modular design allows the user to convert virtually any dump Truck blowers, semi trailer or agricultural trailers to transfer biomass solid fuel or landscape protective covers.